Finished Classic 3″ Strip Coil 0.6mm
Finished classic 3.5″ Strip Coil, made of 0.6mm x 15mm x 6.2 meters long Copper Strip. This Coil is being used on BBMPulser 3B, 4B, 5B & 5.5B models.
Coil weight (no wire) – ~1.5lb
Coil length (with handle) – 12″
Build in 60C N.O Thermal Switch (sensor) 5A 250V
Wire lenght – 6ft
Voltage tested up to 1,500V
Capacitor Bank – up to 1,350uF
Can be used with other PEMFs (Magnetic Pulsers) with in rated Voltage and Capacity
Email me support@bbmpulser.org to place your order
On Sale, $650.00 30% Off, NOW $449.00 USD, shipping in USA $22.00
0.6mm Strip Coil with Sensors (Thermal Switches)
Half Finished 0.6 mm Strip Coil with 2x 60C thermal switches, one N.C. (Normally Closed), one N.O (Normally Open).
Latest design 3″ OD with 1″ ID air core, 5/8″ thick Copper Strip Coil, weight 500 gram
Copper Strip – 0.6 mm thick, 15 mm wide, 6.2 meters long, 38 layers
Price $319.00, Shipping $15 in USA
Email me support@bbmpulser.org to place your order
Insulated Copper Strip Wire 0.6mm thick x 15mm wide
Pure Copper Strip measures 0.6mm thick, 15mm wide
Insulated with Kapton tape
Copper On the picture, you see section long enough for 3x Coils (3″ OD and 1″ ID Coil)
You need 6.2 meters long section to wind 1x 3″ Coil with 1″ Air Core. Your finish Coil will weight ~420gram
Please note, you are buying 1/3-rd of what’s pictured. Enough for 1x Coil. If you buy 2 or 3 Coils, you will get one long section of the copper strip to wind 2 or 3 Coils
This copper strip was prepared, sharp edges were removed, then cleaned with Acetone then covered with insulating tape. This copper strip is ready to be winded into the Coils. Please watch the video to see how it’s done
When you buy raw Copper Strip online or from the store, you will need to insulate it. You cannot use un-insulated Copper strip for your Coil. Insulation process is a bit tricky. You will need insulating machine in order to insulate your Copper strip. Here you can buy already insulated strip (wire) which you can use to wind your Coil. Save yourself time by purchasing insulated wire here
Price for 6.23 meters (enough for 1x 3″ Coil with 1″ air core) of insulated Copper Strip – $249.75, Shipping in USA $12
Please contact me support@bbmpulser.org to place your order
3.5″ inch 3 Part Coil Shell
3 Part 3.5″ O.D. Coil Wand Shell (3D Printed)
Material: Coil Shells – ASA (high temperature plastic), Grey handle is ASA, all other colors are PLA
Color – Grey
Used for 3.05″ O.D. x 15mm thick with 1″ I.D Coils.
You should use 15mm wide and 0.3mm, 0.5mm, 0.6mm, 0.8mm or 1mm thick Copper Strip
I recommend using 0.6mm thick x 15mm wide Copper Strip, you will need 6.5 meters long solid strip, weight 0.5kG (1lb). You will end up with 1″ I.D. (26mm) and 3.05″ O.D. (77.5mm) Coil. To make it easier – use Coil Spool winder to wind your Coil link HERE
Link to buy Copper Strip from eBay HERE
If you have Enclosed 3D Printer, you can download STL or 3MF files for free HERE
3.5 inch 3 Part Coil Shell ver 1.0.4 Price – $30.00 free shipping in USA
Let me know which color handle you want with your order
Email me support@bbmpulser.org to place your order
7 inch 3 Part Coil Shell
Please Note: Coil is NOT included; It’s for your reference only
3 Part 7″ Coil Wand Shell 3D Printed
Material – ASA (high temperature plastic)
Color – Blue
Used for 6.2″ O.D. x 15mm thick Coil
I recommend using 1mm thick x 15mm wide Copper Strip, you will need 13 meters long solid strip, weight 1.4kG (3lb). You will end up with 3.3″ I.D. (84mm) and 6.2″ O.D. (158mm) Coil. To make it easier – use Coil Spool winder to wind your Coil link HERE
Link to buy Copper Strip from eBay HERE
If you have Enclosed 3D Printer, you can download STL or 3MF files for free HERE
7 inch 3 Part Coil Shell ver 1.0.4 Price – $35.00 free shipping in USA
Email me support@bbmpulser.org to place your order
3.5″ Classic Coil Cover
Plastic Cover 3D print from ASA plastic
Fits 3.5″ Classic Coil, compatible with BBMPulser 3, 4, 5, 5.5 & 6 models
price – $15 + $6.60 Shipping in USA
To place your order please Email me with your shipping address and quantity, I will reply with a payment instruction
Thank you
Coil Sleeve
Hand made Coil Sleeve for 3.5″ Classic Coil
Compatible with BBMPulser 3B, 4B, 5B, 5.5B and 6B models
Easy to use. Place red side of the sleeve to the North Side on the Coil
Price $20, Shipping in USA $8
Email me support@bbmpulser.org to place your order
Plastic blank for original BBMPulser 3.5″ Classic Coil
Plastic Blank for original BBMPulser 3.5″ Classic Coil, You will need this to make silicone Mold, using silicone mold you can make the case for your Coil with wires to make professional looking Plastic Coil.
Price $120
Shipping in USA $20
Contact me support@bbmpulser.org
