Store/PEMF kits

Fully pre-built and configured. All you have to do is to place it into the box

I recommend using GameMax Spark Mini Computer Case

Specs:

• Working Voltage – 120VAC (default) if you need 220VAC, please let me know and I will configure it for 220VAC. If you need both 120VAC and 220VAC – Please Let me know and I will install switch for dual Voltage – $15 fee
• Power draw – average 270W, max 420W
• Power Output (Magnetic Flux). On Low – 1 Tesla (10,000 Gauss), on high – 2 Tesla (20,000 Gauss)
• Session time on average 8 min
• Pulsation speed on low output – 1.9Hz (114 Pulses / min), on high output 0.5Hz (30 Pulses / min)
• Power adjustment – build in, smooth low to high power adjustment
• Dimensions – 10.5″ wide x 13.5″ long x 5.5″ tall
• Weight – 19lb
• Capacitor Bank – 264uF 1,300V
• Magnetic Isolation – yes (safety future)
• End of session alarm – yes, Visual & Sound alarms
• Coil Cover – yes, this kit will come with plastic Coil cover
• Coil dimensions – 12″ long (total length) 3.5″ wide
• Coil (applicator) weight (minus wire) – ~1.5lb
• Copper Strip Coil (0.6mm)
• Coil wire – 6.5ft long
• Built to last, life expectancy 7+ years with daily use
• Will trigger muscle on low and high settings
• Pre-built kits come with 6 month Warranty
• Made in USA

Please check with me for availability, if I don’t have one in stock, I will build it after order placed. It takes around 5 days to build it. Email me support@bbmpulser.org

This PEMF kit is fully pre-built and configured. All you have to do is to place it into the box

I recommend to use Cooler Master MCB-NR200  Computer Case

• Working Voltage – 120VAC (default) if you need 220VAC, please let me know and I will configure it for 220VAC. If you need both 120VAC and 220VAC – please let me know and I will install switch for dual Voltage – $15 fee
• Power draw – average 270W, max 420W
• Power Output (Magnetic Flux) –  On low 1.3 Tesla (13,000 Gauss), on high 2.4 Tesla (24,000 Gauss)
• Session time on average 7 min
• Pulsation speed on low – 1.19Hz (71 Pulses / min), oh high 0.31Hz (19 Pulses / min)
• Power adjustment – build in, smooth low to high power adjustment
• Dimensions – 10″ wide x 13.5″ long x 5″ tall
• Weight – 19lb
• Capacitor Bank – 400uF 1,300V
• Magnetic Isolation – yes (safety future)
• End of session alarm – yes, Visual & Sound alarms
• Coil Cover – yes, this kit will come with Coil cover
• Coil (applicator) dimensions – 12″ long (total length) 3.5″ wide
• Coil (applicator) weight (minus wire) – ~1.5lb
• Copper Strip Coil (0.6mm)
• Coil wire – 6.5ft long
• Made in USA
• Pre-built kits come with 6 month warranty
• Built to last, life expectancy 7+ years with daily use
• Will trigger muscle on low and high settings

Please check with me for availability, if I dont have one in stock, I will build it after order placed. It takes around 5 days to build it. Email me support@bbmpulser.org