Complete PEMFs
PCBs (Printed Circuit Boards)
DIY Kits
Coils & Parts
PCBs (Printed Circuit Boards)
DIY Kits
1.1 Tesla (11,000 Gauss) BBMPulser 3B (2024)
3 Years Warranty
Let me know if you have any questions
made in USA
BBMPulser 3B is the latest 2024 model which will give you around 3000 Pulses with 6,000 Gauss intensity in a single 10 min session
Pulsation speed very depending on set intensity, with lower power, pulsation speed increases automatically.
On lowest (6,000 Gauss) it pulsates 4.5x / sec
On highest (11,000 Gauss) it pulsates 1.5x /sec
Smooth power output adjustment from 0.6 Tesla to 1.1 Tesla
Will trigger your muscle even on the lowest output
One session of 10 min usually is enough to treat one or 2 places and feel noticeable benefit.
3.5″ Applicator (Coil) made of Copper strip wire 0.8mm thick, 15mm wide. Unit can stand on the side to save on space. Comes with a stand. Works with both 110VAC or 220VAC 300W. Build in Capacitor Bank Voltage meter, Coil Thermal Protection, 5V 5A Fast USB Charger, Weight ~25lb
Price $2,300 + $80 (PayPal transaction fee), you can avoid transaction fee by paying with Zelle.
To place your order please contact me support@bbmpulser.org for payment instructions. Shipping in USA – $60
1.6 Tesla (16,000 Gauss) BBMPulser 4B
Power input: 3 options. a) 110VAC, b) 220VAC, c) Dual 110AVC and 220VAC 300W
Magnetic Power output 0.8 Tesla – 1.6 Tesla, build in power adjustment
Session time ~8min
On low (0.6 Tesla ) it will pulsate 2.39Hz – 143 pulses/min
On high (1.6 Tesla) it will pulsate 0.66Hz – 40 pulses/min
Build in Coil Thermal Protection, at the end of session when coil gets hot, sound alarm will come on and red Protec LED upfront will start blinking, Coil will stop pulsing and unit will go into stand by mode until Coil cools off. Takes 30-45 min for the Coil to cool off.
Build in 3.5″ Coil (applicator) with 6.5′ Cord
Applicator (Coil) made of Copper Strip wire 0.6mm thick, 15mm wide, weight ~1lb, handle 12″. Build in Thermal Switch
Magnetic Isolation from the Main
Quiet Operation
Price $2,500 + $88 (PayPal transaction fee). If you pay with Zelle there will be no transaction fees. To place your order please contact me support@bbmpulser.org for payment instructions. Shipping in USA – $60
3 Years Warranty
Let me know if you have any questions
made in USA
5 Tesla (50,000 Gauss) BBMPulser 6B
5 Tesla (50,000 Gauss) PEMF (Magnetic Pulser) BBMPulser 6B model
This is the the strongest Magnetic Pulser that I build.
It will come with 2 years Warranty which covers, parts and labor
BBMPulser 6B is 6th generation Pulser, uses 3″ new design Strip Coil made of 0.5mm Copper Strop, its a basic model, easy to use. It has smooth Power adjustment allowing user to adjust power output intensity down to 2.6 Tesla (26,000 Gauss) and increase it to 5 Tesla (50,000 Gauss)
This model takes 120VAC and peaks at 26 Amps, but averages around ~450W (~4 Amps)
It’s heavy, weight approximately 60 lb
Build in Sound Alarm, when Coil gets hot, alarm will sound and red “Protect” LED upfront will start blinking
Session time ~7min, Pulse length ~1.5 millisecond long
On lowest 2.6 Tesla it will pulsate ones every 1.7 Seconds
At 3 Tesla (30,000 Gauss) it will Pulsate ones every 2.2 Seconds
At 4 Tesla (40,000 Gauss) it will Pulsate ones every 5 Seconds
At 5 Tesla pulsation speed will slow down to 15 seconds between pulses
This model packs power, great for deep penetrations
Please Email me support@bbmpulser.org to place your order
Price $4,450 USD, Shipping in USA $180, PayPal transaction fee $162. Avoid transaction fee by paying with Zelle
Please Note this device has not been evaluated by FDA and is intended to be use for experimental purposes
built in USA
What can it be used for?
As per Dr. Robert Beck Protocol
1. to deactivate pathogens in the lymph system 2. to stop Bacteria infections 3. to deactivate Viruses 4. to suppress fungi, tumors 5. works great lowering all kinds of pains 6. to speed up injury recovery 7. heals bones 8. recharges cells, improves organs functions and there are many more uses
Be careful using it over metallic Implants. Magnetic field reacts with all metals.
Iron will be attracted to the Coil, all other metals will be repelled from the Coils North and South sides
Pulser is strong enough to cause in-voluntary muscle contractions even on the lowest output
Let me know if you have any questions, I’m here to help, my customers is my priority
For this model waiting time 2 weeks after order placed
Coils & Parts
Insulated Copper Strip Wire 0.5mm thick x 15mm wide
Pure Copper
Insulated with Kapton tape
Copper Strip measures 0.6mm thick, 15mm wide
On the picture, you see section long enough for 3x Coils (3″ OD and 1″ ID Coil)
You need 6.2 meters long section to wind 1x 3″ Coil with 1″ Air Core. Your finish Coil will weight ~500gram
Please note, you are buying 1/3-rd of what’s pictured. Enough for 1x Coil. If you buy 2 or 3 Coils, you will get one long section of the copper strip to wind 2 or 3 Coils
This copper strip was prepared, sharp edges were removed, then cleaned with Acetone then covered with insulating tape. This copper strip is ready to be winded into the Coils. Please watch the video to see how it’s done
When you buy raw Copper Strip online or from the store, you will need to insulate it. You cannot use un-insulated Copper strip for your Coil. Insulation process is a bit tricky. You will need insulating machine in order to insulate your Copper strip. Here you can buy already insulated strip (wire) which you can use to wind your Coil. Save yourself time by purchasing insulated wire here
Price for 6.23 meters (enough for 1x 3″ Coil with 1″ air core) of insulated Copper Strip – $82.75, Shipping in USA $12
Please contact me support@bbmpulser.org to place your order
Plastic Blank for original BBMPulser 3.5″ Classic Coil, You need this to make silicone Mold, using Silicone Mold you can Mold the case for your Coil with wires to make professional looking Plastic Coil.
Price $120
Shipping in USA $20
Contact me support@bbmpulser.org
0.6mm Strip Coil with Sensors (Thermal Switches)
Half Finished 0.6 mm Strip Coil with 2x 60C thermal switches, one N.C. (Normally Closed), one N.O (Normally Open).
Latest design 3″ OD with 1″ ID air core, 5/8″ thick Copper Strip Coil, weight 500 gram
Copper Strip – 0.6 mm thick, 15 mm wide, 6.2 meters long, 38 layers
Price $159.00, Shipping $15 in USA
Email me support@bbmpulser.org to place your order
