Pricing

 

 

Electronic Circuits here
Abbreviations:
B – Basic, S – Standard, D – Double Coil, standard configuration 

4 – fourth generation

5 – fifth gen & so on, the higher the number the newer and stronger the model

1 Tesla = 10,000 Gauss

 

BBMPulser 5B 2.4 Tesla, Dual input Voltage, Strip Coil – $2,500 (2024 model) watch video here

BBMPulser 5.5B 3.5 Tesla 120VAC only-  $3,450 (2023 model)

BBMPulser 6B 5 Tesla 120VAC only  – $4,500 (2022 model)

2 Years warranty on 5.5B & 6B models, 3 years warranty on BBMPulser 5B model

Warranty covers Parts, Labor & Shipping cost in USA only, outside of USA shipping cost is not included in warranty.

 

 

BBMPulser 5B 2.4 Tesla, 120VAC (Discontinued)

Please see the Video click here  for New model (2024)

BBMPulser 6B 5 Tesla, (new Strip Coil) 120VAC

To place a new order please contact me support@bbmpulser.org

BBMPulser 5B Plus 2.6 Tesla Magnetic Pulser PEMF (Discontinued)

BBMPulser 5B 2.4 Tesla Magnetic Pulser pre-built kit  (Discontinued)

Item discontinued

 220VAC 2.4 Tesla BBMPulser 5B full PCB only

Price $29    

Shipping in USA $12

Item discontinued

 120VAC 2.4 Tesla BBMPulser 5B full PCB only

Price $29    

Shipping in USA $12

Circuit BBMPulser 5B  here

Parts List here

Low Voltage board 120VAC or 220VAC BBMPulser 5B 2.4 Tesla Magnetic Pulser PCB only

Price $14   

Shipping in USA $4

 

Plastic Blank of original BBMPulser Classic Coil, You need this to make silicone Mould, using Silicone Mould you can incase your Coil with wires to make proffesional looking Plastic Coil

Price $120

Shipping in USA $20

BBMPulser Cassic 3″ Coil used in 4th, 5th gen pulsers

Coil made of 14AWG Copper Magnet wire. 

Polyurethane resin flex it 90 used as a glue

Fiber cloth used each layer for extra strength

Coils specs:

ID 1″, OD 3″, 5/8″ thick

Weight 425g or 0.93lb

15 Layers, 9 turns each layer

 

Price $95.00

Shipping in USA $12

BBMPulser 3″ Strip Coil used in 3.6 Tesla BBMPulser 5.5B 

Power Rated up to 6 Tesla (60,000 Gauss)

Driving Voltage tested up to 1,5kV

Coil made of Flat Strip Copper Wire 0.6mm x 15mm 

Polyurethane resin flex it 90 used as a glue

Coils specs:

ID 1″, OD 3″, 5/8″ thick

Weight 500g 

38 Layers

 

Price $135.00

Shipping in USA $12

BBMPulser 3″ Strip Coil used in BBMPulser 5.5B and BBMPulser 6B models 

Power Rated up to 6 Tesla (60,000 Gauss)

Driving Voltge tested up to 1,5kV

Coil made of Flat Strip Copper Wire 0.5mm x 15mm 

Polyurethane resin flex it 90 used as a glue

Coils specs:

ID 1″, OD 3″, 5/8″ thick

Weight 500g 

43 Layers

 

Price $135.00

Shipping in USA $12

Classic BBMPulser 3″ Coil

Used in 4th and 5th gen Pulsers with power up to 3 Tesla

Please look at the pictures for more info

Made of 2 different polyurethane resents, Flex it 90 is used over the coil itself and hard resin used for the handle

Handle may come in 2 collors black or white

 

Price $300

Shipping in USA $16

To place a new order please contact me support@bbmpulser.org