Abbreviations:
B – Basic, S – Standard, D – Double Coil, standard configuration
4 – fourth generation
5 – fifth gen & so on, the higher the number the newer and stronger the model
1 Tesla = 10,000 Gauss
BBMPulser 4B 1.4 Tesla output, 120VAC or 220VAC – $1,450
BBMPulser 4S 1.9 Tesla, 120VAC or 220VAC models – (not available)
BBMPulser 4D 1.9 Tesla, 120VAC or 220VAC – (not available)
BBMPulser 5B 2.4 Tesla, 120VAC or 220VAC – $1,950
BBMPulser 5B 2.4 Tesla, 120VAC pre-built kit – $995
BBMPulser 5B Plus 2.6 Tesla 120VAC and 220VAC – $2,500
BBMPulser 5S 2.8 Tesla, 120VAC or 220VAC -$2,450 (not available)
BBMPulser 5D 2.8 Tesla, 120VAC or 220VAC – (not available)
BBMPulser 5.5B 3.5 Tesla (new strip Coil) 120VAC $3,450
BBMPulser 6B 5 Tesla, (new strip Coil) 120VAC – $4,500
2 Years warranty on all models
BBMPulser 5B 2.4 Tesla, 120VAC
BBMPulser 6B 5 Tesla, (new Strip Coil) 120VAC
To place a new order please contact me support@bbmpulser.org
BBMPulser 5B Plus 2.4 Tesla Magnetic Pulser PEMF
BBMPulser 5B 2.4 Tesla Magnetic Pulser pre-built kit
Low Voltage board 120VAC or 220VAC BBMPulser 5B 2.4 Tesla Magnetic Pulser PCB only
Price $14
Shipping in USA $4
Plastic Blank of original BBMPulser Classic Coil, You need this to make silicone Mould, using Silicone Mould you can incase your Coil with wires to make proffesional looking Plastic Coil
Price $120
Shipping in USA $20
BBMPulser Cassic 3″ Coil used in 4th, 5th gen pulsers
Coil made of 14AWG Copper Magnet wire.
Polyurethane resin flex it 90 used as a glue
Fiber cloth used each layer for extra strength
Coils specs:
ID 1″, OD 3″, 5/8″ thick
Weight 425g or 0.93lb
15 Layers, 9 turns each layer
Price $95.00
Shipping in USA $12
BBMPulser 3″ Strip Coil used in 3.6 Tesla BBMPulser 5.5B
Power Rated up to 6 Tesla (60,000 Gauss)
Driving Voltage tested up to 1,5kV
Coil made of Flat Strip Copper Wire 0.6mm x 15mm
Polyurethane resin flex it 90 used as a glue
Coils specs:
ID 1″, OD 3″, 5/8″ thick
Weight 500g
38 Layers
Price $135.00
Shipping in USA $12
BBMPulser 3″ Strip Coil used in BBMPulser 5.5B and BBMPulser 6B models
Power Rated up to 6 Tesla (60,000 Gauss)
Driving Voltge tested up to 1,5kV
Coil made of Flat Strip Copper Wire 0.5mm x 15mm
Polyurethane resin flex it 90 used as a glue
Coils specs:
ID 1″, OD 3″, 5/8″ thick
Weight 500g
43 Layers
Price $135.00
Shipping in USA $12
Classic BBMPulser 3″ Coil
Used in 4th and 5th gen Pulsers with power up to 3 Tesla
Please look at the pictures for more info
Made of 2 different polyurethane resents, Flex it 90 is used over the coil itself and hard resin used for the handle
Handle may come in 2 collors black or white
Price $300
Shipping in USA $16
To place a new order please contact me support@bbmpulser.org